3D Printing Polylactic Acid PLLA CAS 33135-50-1

Description

PLLA is made from poly(L-lactide) and it has good biocompatibility, bio resorbability, biodegradability. After degradation in the body, the product is excreted by metabolism and it does not have harm and side effect to the human body. Therefore our products are currently widely used in the field of medical devices and microspheres for drug delivery etc.

Physical-chemical properties

Chemical name

Poly(L-lactide), Poly(L-lactic acid), L-polylactide

CAS Registry number

33135-50-1

Chemical structure1

Molecular formula1

Chemical structure2

Molecular formula2

Specification

Test

Method

Specification

Appearance

Visual

White, pale yellow powder

Inherent viscosity

Ubbelohde viscometer

0.30-2.25 dl/g

Residual monomer

Gas chromatography

<0.5%

Stannum (Catalyst)

Atomic fluorescence spectrometry

<150 ppm

For each batch a certificate of analysis is provided, showing the analytical data determined in our quality

control laboratory.  Additional analytical data can be made upon request.

Packaging

100g/500g/1Kg per aluminum foil bag

Recommend storage

Stored in a cool and dry place without sunlight, a refrigerator is recommended.

Temperatures (2-8°C)

Shelf life

When stored in the original packaging at low temperatures (2-8°C), PLLA keeps its initial properties for at least two years.

Product catalogue

Model

IV Range

dl/g

Mv Range
(ten thousand)

PL-05

0.30-0.75

0.6-2.0

PL-10

0.75-1.25

2.0-4.0

PL-15

1.25-1.75

4.0-6.4

PL-20

1.75-2.25

6.4-9.0